07.21 14:50
Production process of industrial glycerol
Production process of industrial glycerol Natural raw materials include industrial glycerol made from oils, molasses and starch, customarily referred to as natural industrial glycerol. There are three main production methods for industrial glycerin: One is natural industrial glycerin, which is a by-product recovered from the saponification and hydrolysis of natural oils and fats to produce soap or fatty acids, and is still the main industrial source of industrial glycerin in the world;
Production process of industrial glycerol
Natural raw materials include those made from oils, molasses and starchIndustrial GlycerolIt is customarily called natural industrial glycerin.
There are three main production methods for industrial glycerin:
One is natural.Industrial Glycerol, It is a by-product recovered from the saponification and hydrolysis of natural oils to produce soap or fatty acids, which is still the world's most importantIndustrial Glycerolthe main sources of industry;
The second is to use petrochemical products as raw materials to synthesize industrial glycerin by chemical methods;
The third is to use starch or molasses as raw materials to produce industrial glycerol through microbial fermentation.
saponification
With natural oil as raw material, soap by-product industrial glycerin, the product has high glycerin content and is widely used. This method has been the main production method in our country for many years. In recent years, due to the lack of natural oils, the development of washing powder and detergent, and the influence of imported soap, the output of glycerin has dropped sharply, hindering the development of saponification.
1. Extraction of glycerol from soap waste by oil saponification
Saponification of oils and caustic soda produces sodium fatty acids (I. e., soap) and industrial glycerin. The response is as follows:
After saponification of oil and lye to produce soap, salt is added. Because soap cannot be dissolved in a certain concentration of salt water, the soap has a lighter specific gravity and floats on the upper layer.Industrial GlycerolAnd part of the pigment and other impurities can be dissolved in salt water, the proportion is greater than soap, in the lower separation. When extracting industrial glycerol, the waste liquid is purified to remove impurities, then saturated by evaporation and concentration, and then decolorized to extract new glycerol that meets the requirements.
2. Extraction of industrial glycerin by oil hydrolysis
Oil hydrolysis produces fatty acids and industrial glycerol, the reaction is as follows:
Oil hydrolysis is mainly the industrial preparation of stearic acid from fatty acids to obtain industrial glycerol. The industrial glycerol dilute solution obtained by hydrolysis is called "sweet water" by the fatty acid industry"
Using different hydrolysis methods, the quality of the obtained sweet water is also different. The hydrolysis method of oil is divided into three kinds of normal pressure, medium pressure and high pressure decomposition. The common method of oil hydrolysis is medium pressure decomposition method, that is, oil and water are added with appropriate amount of catalyst, and zinc oxide is commonly used. Hydrolysis is carried out by introducing steam under a pressure of 0.8-1.2MPa, and the glycerin content in sweet water industry is 12%-18%, which is refined by evaporation, concentration, distillation and decolorization.Industrial Glycerol.
glycerol synthesis
Synthetic industrial glycerin is prepared from petrochemical raw materials, divided into propylene chlorination, propylene oxidation, propylene acetic acid, acetic acid propylene, etc.
A, propylene chlorination method (I. e. chloropropane method)
The chloropropane method uses 3 carbon elements as raw materials for four-step synthesis, with mature technology, low unit consumption and mature production technology. The industrial glycerol produced by this synthetic method accounts for 80% of the synthetic industrial glycerol production. The production process is divided into the following four steps:
(1) High-temperature chlorination of propylene to produce chloropropene
(2) 3-chloropropene hypochlorination to produce dichloropropanol
(3) Chloropropane prepared from dichloropropanol and alkali ring
(4) Propane hydrolysis to produce synthetic industrial glycerol
In the chloropropane method, the productivity of the pressurized method is 7.5 times that of the normal pressure method, and the yield is 98%. It is the main production method abroad at present, but the process is long, the consumption of chlor-alkali is large, and there is calcium chloride in the production. Organic chloride corrosion is serious, and the amount of sewage is large. France changed to direct hydrolysis (no chloropropane), no lime milk, no calcium chloride post-treatment, is the development direction of glycerol production.
B, propylene oxidation method (I. e. alkenal method)
The two-step synthesis of propylene oxidation method was carried out with three kinds of carbon elements as raw materials, and the reaction conditions were high temperature and high pressure.
RELATED INFORMATION
Polymerized Glycerol Market Potential in Biomass Materials Manufacturing
To learn more about the market potential and development trend of polymerized glycerin, please read this article.
View DetailsDevelopment Status and Prospect of Glycerol Refining Technology
Polymerized glycerol is a chemical with broad application prospects. This paper discusses the development status and prospects of glycerol refining technology, and reveals the potential of polymeric glycerol in the fields of pharmacy, food, cosmetics and so on. With the increasing demand for environmentally friendly products, polymerized glycerin as a natural and non-toxic chemical will become a popular choice in the future market. Polyglycerol enterprises need to strengthen technological innovation, improve product quality, and actively respond to environmental protection policies in order to stand out in the competitive market.
View DetailsProduction Technology and Application Field of Polymerized Glycerol
Article Introduction: The production process and application field of polymerized glycerol are discussed. Polymerized glycerol has a wide range of applications in the cosmetic, pharmaceutical and food industries. Understanding the production process and application field of polymerized glycerol can make better use of this chemical substance to meet people's demand for product quality and effect.
View Details