03.01 13:08
Glycerol manufacturers: glycerol production methods and technical progress
At present, there are three main production methods of glycerin: one is to recover natural glycerin as a by-product from the saponification and hydrolysis of natural oil to produce soap or fatty acid, which is still the main industrial source of glycerin in the world; the other is to use petrochemical products as raw materials to chemically synthesize glycerin; the third is to use starch or molasses as raw materials to produce glycerin through microbial fermentation. The following is a detailed analysis of the production process.
At present, there are three main production methods of glycerin: one is to recover natural glycerin as a by-product from the saponification and hydrolysis of natural oil to produce soap or fatty acid, which is still the main industrial source of glycerin in the world; the other is to use petrochemical products as raw materials to chemically synthesize glycerin; the third is to use starch or molasses as raw materials to produce glycerin through microbial fermentation. The following is a detailed analysis of the production process.
Using natural oil as raw material, glycerin is a by-product of soap making. The product has a high content of glycerin and is widely used. For many years, this method has been the main production method in my country. In recent years, due to the lack of natural oil, the rapid development of washing powder and detergent, and the influence of imported soap, the production of glycerin has been greatly reduced, which hinders the development of the saponification method. After the oil and lye are saponified to produce soap, salt is added. Since soap cannot be dissolved in a certain concentration of salt water, the specific gravity of soap is small and floats on the upper layer, impurities such as glycerin and some pigments can be dissolved in brine, their specific gravity is greater than soap, and separated in the lower layer. When extracting glycerin, the waste liquid is thoroughly purified to remove impurities, and then through the process of evaporation, concentration and steaming, and finally decolorization, to extract new glycerin of the required quality.
The hydrolysis of oil is mainly to produce stearic acid from fatty acid industry and obtain glycerol, the dilute glycerol solution obtained by hydrolysis is usually called "sweet water" in fatty acid industry, different hydrolysis methods are used, and the quality of sweet water obtained is also different, the hydrolysis methods of oil are divided into three categories: normal pressure, medium pressure and high pressure decomposition method, the commonly used method in oil hydrolysis is medium pressure decomposition method, that is, a proper amount of catalyst is added to the fat and oil, and usually zinc oxide is used, steam is injected, hydrolysis is carried out at a pressure of 0.8-1.2MPa, and the sweet water contains 12%-18% of glycerin, and then it is decolorized by evaporation, concentration and distillation to obtain the glycerin product.
The production of synthetic glycerin from petrochemical raw materials is divided into propylene chlorination method, propylene oxidation method, propylene acetate method, etc.
The fermentation method is the third glycerol (glycerol) production method after saponification (oil hydrolysis) and chemical synthesis, which is mainly a by-product of biodiesel. The fermentation method is prepared by microbial fermentation of starch, sugar and agricultural products. The raw materials are rich and the equipment is simple. Among them, the distiller's grains is used as the raw material, the raw materials are easy to obtain and the process is simple.
Production at home and abroad are based on different sources of raw materials, the traditional industrial production methods of glycerol are divided into two: natural oil and propylene as raw materials, at present, China has developed a new technology to produce glycerol using starch raw materials.
more glycerin details to the extent possible in weifang a blue new material limited company.
RELATED INFORMATION
Polymerized Glycerol Market Potential in Biomass Materials Manufacturing
To learn more about the market potential and development trend of polymerized glycerin, please read this article.
View DetailsDevelopment Status and Prospect of Glycerol Refining Technology
Polymerized glycerol is a chemical with broad application prospects. This paper discusses the development status and prospects of glycerol refining technology, and reveals the potential of polymeric glycerol in the fields of pharmacy, food, cosmetics and so on. With the increasing demand for environmentally friendly products, polymerized glycerin as a natural and non-toxic chemical will become a popular choice in the future market. Polyglycerol enterprises need to strengthen technological innovation, improve product quality, and actively respond to environmental protection policies in order to stand out in the competitive market.
View DetailsProduction Technology and Application Field of Polymerized Glycerol
Article Introduction: The production process and application field of polymerized glycerol are discussed. Polymerized glycerol has a wide range of applications in the cosmetic, pharmaceutical and food industries. Understanding the production process and application field of polymerized glycerol can make better use of this chemical substance to meet people's demand for product quality and effect.
View Details